Sales and New Connections

To get connected via your LINKSYS modem, you'll need to log into your modems gateway.

What you'll need:

  • A device capable of connecting to Wi-FI
  • Your Wi-Fi username and password (if you have forgotten these, you may need to reset your modem)
Note: This can be done on most mobile devices, but we recommend doing these steps with your PC if you have one.

Logging into your modem

  1.     On your device, connect to Wi-Fi, using your normal username and password
  2.     Open a browser window on your device
  3.     Enter 192.168.1.1 and press enter
  4.     Check which of the below two pictures match the page you're seeing, and continue with the steps below

Recent LINKSYS modem gateway

Snap_2019-01-22_at_11.26.06.png

The red boxes show selections you will have to make, in order from left to right.

  1.     Click the picture of two gears (settings
  2.     Choose 'Internet Settings'
  3.     Change the connection type to 'Automatic configuration - DHCP'
  4.     Change 'MTU' to 'Manual
  5.     Change 'Size' to '1492'
  6.     Click apply

Your modem will then attempt to get connected. If, after about 5 minutes you're not connected, contact us via Live Chat and one of our team will be able to help.

Older LINKSYS gateway

Snap_2019-01-22_at_11.09.35.png

 

The red boxes show selections you will have to make. In this order, choose

  1.     'Setup'
  2.     'Basic setup'
  3.     'Ethernet'
  4.     'Automatic configuration - DHCP'
  5.     'MTU' -  'Manual', and '1492'

Your modem will then attempt to get connected. If, after about 5 minutes you're not connected, contact us via Live Chat and one of our team will be able to help.

Live_Chat.png

Was this article helpful?
2 out of 14 found this helpful